EN
damaged. Do not try to repair the device on your own – contact the authorized
service center. If the feeder cable is damaged, it should be replaced by the
manufacturer to avoid hazards.
12. Do not modify the device in any way.
13. Use original spare parts only.
14. Small children shall not play with the plasti c packaging. To prevent suff ocati on,
keep the packaging (plasti c bags, boxes, polystyrene foam) out of reach of
children.
15. This device can be used by persons with limited physical, sensory, or mental
capabiliti es, or without experience and knowledge, if they have been supervised
or instructed on how to use the device safely and understand the associated
risks.
16. The device is not a toy. Children shall not play with the device.
17. Children shall not use or clean this device. Store the device and power cord
out of the reach of children
18. NOTE! To avoid hazards related to unintenti onal resetti ng of thermal cut-out, this
device must not be supplied through external devices, i.e. ti mer or circuit which
acti vates and deacti vates regularly; this may lead to damage to the product.
19. Do not put anything into the device when it operates.
20. The surface on which the device is used must be fl at, smooth and stable.
21. Do not connect the device to source of power before you assemble all required
accessories.
List of parts (fi g. A)
1.
DRIVE SHAFT
2.
INTERLOCK RELEASE KNOB
3.
SPEED ADJUSTMENT
4.
FEEDER CABLE
5.
PAN
How to use the pan
1.
To lift the arm of the device, turn the interlock release knob in a clockwise directi on
(fi g. 1).
2.
Place the pan cover on the device (fi g. 2).
3.
Place the pan in the device and turn in a clockwise directi on unti l it clicks (fi g. 3).
6.
HARD DOUGH STIRRING HOOK
7.
STIRRER
8.
BEATER
9.
PAN COVER