Example of use for swivel arms e-fix E25 and E35
E 25
1
E 35
1
Always switch off the control unit if it is not being used! This prevents your
!
wheelchair from rolling away unintentionally, e.g. due to accidental contact with
the joystick.
3
Instructions for use swivel arm e-fix
Approaching a table
• When approaching the edge of a table with your
wheelchair, remain far enough from the table so
that it is still possible to move the swivel arm.
• Press the control button [1] and swing the swivel
arm to the desired lateral position. At an angle
of approx. 45 degrees you will hear a soft
"clicking" sound. If the swivel arm is swung back
to its starting position from this position, it then
locks back into this position automatically.
• Now move closer to the table at low speed and
exercise caution in doing so.
• Switch off the control unit if it is not being
used!
Moving away from a table
• Switch on the control unit if necessary.
• Move back slightly from the table and do so
slowly.
• Swing the swivel arm back to its starting
position. It will lock into this position
automatically.
• You can now continue to move as usual