Publicité
Les langues disponibles
Les langues disponibles
STEP 18: Tighten Roller Nuts (B18) with adjustable
wrench.
STEP 20: Using a 1/8" drill bit drill pilot holes
through the pre-drilled holes into the shower wall
STEP 22: Fasten Door Stops (B8) to the Wall
Jambs (B1).
STEP 19: Ensure the Wall Jambs (B1) are plumb.
If not adjust by turning the Adjustment Nut (B19)
with a Phillips screw driver through the holes in the
Wall Jambs (B1).
STEP 21: Fasten the Wall Jamb (B1) using #10 - 3"
Screws (B12) into the wall.
.
STEP 23: Insert plugs to cover screw holes on the
Door Stopper (B8).
LEVEL
7
Publicité
