Pinnacle Systems Studio AV/DV Deluxe Guide De Démarrage Rapide page 7

H I
ARDWARE NSTALLATION
To insert the hardware into your computer, proceed as follows:
1. Discharge yourself charge by touching the metal case of your computer.
2. Switch off the computer and all peripheral devices. Pull out the power
3. Loosen the screws of the computer's cover and remove the cover.
4. Select a free (busmaster) PCI slot.
5. Remove the slot shield at the back of the computer. If necessary, remove
the screw at the cover.
6. Insert the board carefully in the selected slot. Hold the board at the top
edge and push both ends simultaneously into the slot. Press the board's top
edge to make sure that the board is firmly seated in the slot. If any
components, as e.g. the chilling unit and the fan, on the CPU are in your
way, please choose another slot.
cord and disconnect all necessary cables.
Slot shields
Slots
Installation
PCI slots
Quick Start Guide
Power
supply
unit
3