Pinnacle Systems Studio AV/DV Deluxe Guide De Démarrage Rapide page 11

Connecting the blueBOX
Via the blueBOX you can connect your analogue video devices or an
external monitor to your Studio AV/DV Deluxe board. Connect the
blueBOX to the Studio AV/DV Deluxe board directly via the cable of the
blueBOX.
blueBOX Out
blueBOX-Cabel
Connecting the Audio loop-through
For audio monitoring using your PC speakers, connect the Audio Output on
the back of the Studio AV/DV Deluxe board to the Audio Line-IN of your
sound board using the Audio loop-through cable included in the package.
Connecting the Video Devices
In the following, the options for cabling your video source—referred to as
the player—are described. The player provides the video and audio signals
that you want to digitize ("capture") to your hard disk and then edit on your
PC.
Subsequently, connections to the recorder are explained. The recorder is the
device—typically a VCR—that you would like to output your final
production to.
Player: DV device
Devices that connect to the board include any DV or Digital 8 format video
camcorder or recorder that has an IEEE-1394/DV connector. On many
devices, this connector is labeled "i.Link".
To connect your DV camcorder/VCR to the Studio AV/DV Deluxe, use the
IEEE-1394 DV cable included in the package.
Studio Deluxe Board
D-Sub26-Connector
4-pin connects to the
DV camcorder / VCR
6-pin connects to your
computer's 1394 port
7
Quick Start Guide