Publicité
Les langues disponibles
Les langues disponibles
∙ The structural stability of the metal trestle is not designed for this. Only install the metal trestle vertically onto even,
load-bearing surfaces. Slanted metal trestles can slip or topple over.
There is a risk of collapse, if the table is placed onto an insufficiently strong surface.
∙ Do not place the metal trestle onto damp or oily surfaces or loose ground, e.g. ballast, gravel or grit The metal trestle
can slip or sink into unsuitable surfaces.
∙ Do not place loads onto the metal trestle that exceed its maximum load-bearing capacity.
See: 'Technical Data', page 5
If too much weight is placed onto the trestle, it can bend and collapse.
∙ Do not climb onto the metal trestle. The metal trestle is not designed for climbing on.
∙ All loads should be placed evenly onto the beam from the centre outwards.
The metal trestle will topple over, if loads are placed at the end of the beam.
∙ Only use the metal trestle if all support legs are completely spread and all locking struts are hooked in.
The metal trestle is unstable if assembled incorrectly.
∙ Do not raise the work height of the beam with extensions. Increasing the work height will raise the centre of gravity and
reduce the overall stability.
∙ Do not place loads onto the locking struts. The locking struts can bend under excessive loads and impair the stability of
the metal trestle.
∙ Do not place a sidewards load onto the metal trestle. The metal trestle can topple over if moved when bearing a load or
if you lean against it.
3 - Check the delivery scope
Check that the delivery is complete and that all parts are undamaged.
In case of missing parts or damage:
∙ Do not assemble the metal trestle.
∙ Do not use the metal trestle.
∙ Send a compliant to the dealer.
Fig. 3.1: Parts
No.
Designation
1
2x side part with safety struts and lock splint
2
2x foot strut
3
2x standpipe, height-adjustable
4
1x beam with side stoppers
5
1x long strut
8
Fig. 3.2: Assembly material
No.
Designation
6
2x semi-round head Philips screw
M 5 x 12
4x washer
2x nut MS
7
2x hex collar screw
M5 x 18
2x washer
2x nut MS
8
2x semi-round head Philips screw
M 6 x 35
16x washer
8x nut M6
9
4x hex screw
M 8 x 45
4x washer
4x nut MB
Publicité
