Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
PT
DE
IT
FR
6. FOOTRESTS USAGE
The height of standard footrests can be changed with tools (Figure
the screewa and then adjust the right place for user, finally tighten the screws.
7. REPLACING THE SEAT UPHOLSTERY
La tapicería del asiento puede sustituirse si fuera necesario aflojando los tornillos
de estrella. (Figura
9
8. REPLACING FRONT WHEELS OR
FRONT WHEELS UNIT
8.1.
If necessary, the front wheels can be removed /installed with an open-end
wrench/ring wrench and an Allen wrench (Figure
please proced in reverse order. Firmly retighten the screw connection.
8.2.
If necessary, the front wheels unit can be removed/installed with an open-end
wrench/ring wrench. Loosen and remove the nut above the caster mounting
(Figure
). Pull the fork with the axle out of the ball brearings. Replace the
12
front wheels unit. For reassembly, please proceed in reverse order. Firmly
retighten the screw connection.
8
EN
ES
).
10
S220 Sevilla | S230 Sevilla
11
item A). For reassembly,
9
). To release
10
Publicité
Chapitres
Table des Matières
