Télécharger Imprimer la page

Fanimation AMPED FP7634 Serie Mode D'emploi page 10

Publicité

Les langues disponibles

Les langues disponibles

NOTE: The remote unit has 32 different code
combinations. To prevent possible interference from
or to other remote units, simply change the
combination code in the remote and receiver.
1.
To set the code on receiver unit, slide dip switches
to the same positions as set on the remote. (Figure 1)
NOTE: Factory setting is all up. Do not use this
position.
WARNING
To avoid possible electrical shock, be sure electricity
is turned off at the main fuse box before wiring.
(Figure 2)
NOTE: If you are not sure if the outlet box is grounded,
contact a licensed electrician for advice, as it must be
grounded for safe operation.
CAUTION: INCORRECT WIRE CONNECTION WILL
DAMAGE THIS RECEIVER.
2.
Slide the receiver into the hanger bracket before
wiring as shown in figure 3.
How to Wire Your Ceiling Fan
Receiver
Hanger Bracket
Receiver
NOTE: Supply wires
omitted for clarity.
10
Remote Control
ON
DIP
1
2
3
4
5
Dip Switch
Figure 1
Main Fuse Box
Figure 2
Figure 3

Publicité

loading

Ce manuel est également adapté pour:

Amped fp7634blAmped fp7634blbs