Publicité
Les langues disponibles
Les langues disponibles
9100496
OPERATION
1.
Unscrew the fluid cap and pour the cleaning detergent into the container.
Only use a detergent designed for the cleaning task at hand.
2.
Attach the air hose to the air connector on the cleaning gun's handle.
a.
Install a quick connector on the handle to ease the attaching and
removal of the air hose.
3.
Set the air pressure between 100 and 115 PSI.
4.
Aim the tool at the workpiece. Squeeze the trigger to allow the air to flow.
This will draw the detergent into the airstream and eject it from the nozzle.
5.
Spray until the detergent covers the surface of the workpiece.
6.
Release the trigger to stop the airflow.
7.
Once the work task is complete, remove the air hose and release the
remaining pressure from the tool. Empty the shampoo from the
tool's container.
CARE & MAINTENANCE
1.
Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2.
When servicing, use only identical replacement parts. Only use accessories
intended for use with this tool. Replace damaged parts immediately.
3.
Always check for cracks and leaks in the tool, air hose, connectors and
regulator. These problems must be fixed immediately due to the dangers
involved with air under high pressure.
4.
Keep the tool clean. Wipe the tool with a clean cloth and periodically blow
out all areas with compressed air.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
6
Engine Cleaning Spray Gun
For technical questions call 1-800-665-8685
V4.0
Publicité
