Publicité
Remote Controller Instructions
NOTE:
Function buttons
ON/OFF button
Operation starts when this button
is pressed and stops when the
button is pressed again.
NOTE: If the unit has ENERGY
SAVER function, it will initiate
automatically the Energy Saver
function under Cool, Dry, and
Auto(only Auto-Cooling and
Auto-Fan) modes.
TEMP DOWN button
Push this button to
decrease the indoor
temperature setting in
1ºC/1ºF increments to
17ºC/62ºF.
TIMER button
Push this button to activate
the "Auto Start" or "Auto
Stop"program.
ONE TOUCH button
Push this button, the system
will automatically shift to COOL
operation with auto fan speed,
the setting temperature is
26ºC/80ºF. And the timer setting
program will be cancelled.
Press this button to select the
desired operation mode from
AUTO, COOL, DRY, HEAT
(Cooling & heating models
only) and FAN.
NOTE:
mode if the machine you
purchased is cooling only type.
Heat mode is not supported by
the cooling only appliance.
Used to select the fan speed
in four steps: Auto, Low,
Med and High.
Press this button to activate
the Sleep mode. This function
is available on COOL, HEAT
or AUTO mode only and
maintain the most comfortable
temperature for you.
Press this button to activate
the Energy-saving mode.
Press it again to stop the
funtion.(on some models)
22
MODE button
Do not select HEAT
TEMP UP button
Push this button to increase
the temperature setting
in 1
C/1
F increments to
º
º
30
C/86
F
º
º
FAN button
SLEEP button
ENERGY SAVER button
Publicité
