Publicité
Remote Controller Instructions
Handling the remote control
CAUTIONS
The air conditioner will not operate if curtains, doors or other materials block
the signals from the remote controller to the indoor unit.
Prevent any liquid from falling into the remote controller. Do not expose
the remote controller to direct sunlight or heat.
If the infrared signal receiver on the indoor unit is exposed to direct sunlight,
the air conditioner may not function properly. Use curtains to prevent the
sunlight from falling on the receiver.
If other electrical appliances react to the remote controller, either move these
appliances or consult your local dealer.
Battery Installation Instructions
Step 1: Insert a coin vertically in the groove
on the battery cover, and turn coin 45º
clockwise; make sure that the groove is
aligned with the "unlock" sign as shown
below and remove the battery cover.
Step 2: Install battery inside the remote
controller, the positive (+) side up.
Step 3: Install the battery cover, make
sure the battery cover groove is aligned
with the "unlock" sign. Insert a coin
vertically in the groove and press it
gently, turn coin 45º counter-clockwise;
make sure the groove is aligned with
the "lock" sign as shown below.
20
16 ft (5 m)
Publicité
