KW Hydraulik BDL041 Manuel D'utilisation page 21

English
USING THE TOOL
Move the moveable die in contact of the contact wire by pressing the advance trigger. Make sure that the tool is cen-
tered relative to the kink.
Press the crimping trigger up to automatic stop of the tool.
CAUTION: THE DIE TIGHTENS VERY TIGHTLY. DO NOT SLIDE YOUR FINGERS IN THE DIE PROFILE.
DO NOT USE THIS TOOL ON LIVE CABLES
Press the release trigger to retract the piston.
Pull the spring and slide the head of the tool. Remove the tool of the contact wire.
0215 - BDL041 - 21