Victron energy Blue Smart IP22 24/16 Manuel page 17

To disable Bluetooth:
i. Complete initial Bluetooth pairing and connection using the default PIN code (000000) or the
current PIN code set.
ii.
Access the 'device options' by selecting the 'settings' icon (gear) in the top right corner, then the
'device options' icon (three vertical dots).
iii. Open the 'Product info' page by selecting 'Product info'.
iv.
Beside 'Bluetooth Enabled' select 'DISABLE' to open the 'Disable Bluetooth' window.
v. Select 'OK' as confirmation.
d) Re-enabling Bluetooth
It is possible to re-enable Bluetooth using the MODE button.
To re-enable Bluetooth:
i. Depress and hold the MODE button (on the Blue Smart Charger) for 10 seconds.
ii. After 10 seconds have elapsed all blue LEDs will blink twice to indicate that Bluetooth has been
re-enabled, and all Bluetooth settings reset.
15