Publicité
1
2
-
The luminaire shall be installed by a qualified electrician and wired in accordance with the latest IEE electrical
regulations or the national requirements.
-
For non-user replaceable light sources: The light source contained in this luminaire shall only be replaced by
manufacturer or his service agent or a similar qualified person.
-
The luminaire is complied to IEC 60598-1 ed. 8 or GB 7000.1-2007.
-
Luminaire connection is Y type: If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively
replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
-
The wire connection method is determined by local electrical codes and regulations, typically either wire nuts or
screws terminal blocks.
-
Do not switch on before complete installation.
-
It is recommended to use a supply box with a minimum IP65, and 3P terminal, the terminal is rated voltage is
250V at least.
1
2/2
2
16Nm
4.0
25
8
N
L
Cable: 60245IEC57
Min. 3x1,0 mm
Max. 3x2,5 mm
Ø 6.5-Ø 7.5 mm
Min. 100 mm
12
2
2
2021-5-25
Approved
Publicité
