BERNSTEIN PRA 30 Mode D'emploi page 9

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
REAR OF THE UNIT
USING THE RUBBER FEET
AUX
AM
FM
OFF
USING THE EXTERNAL POWER ADAPTER OR AN EXTERNAL POWER SUPPLY
When using the external power adapter or an external power supply the batteries (6xAA) must be removed
from the battery compartment.
SPECIFICATIONS
Speaker assembly:
Power supply:
External power adapter:
Dimensions (wxhxd):
Weight:
SUBJECT TO TECHNICAL CHANGE.
GB
GB
FM antenna (7)
Integrated FM telescopic antenna which can be tilted
to enable optimum reception.
Supply voltage input (8)
Used for connecting the supplied external power
adapter.
The 12-volt DC input is suitable for operating the unit
in a boat or recreational vehicle using an adapter with
integrated 1A cable fuse.
Battery compartment (9)
Use 6 x AA batteries and pay attention to their correct
polarity.
The supplied self-adhesive rubber feet can either be
attached to the bottom or the side of the unit. This
allows the unit to be used either vertically or
horizontally.
1x2.75" broadband speaker, magnetically shielded
12 V DC, 1A, 12 VA
Input: 10 – 240 V~/50 – 60 Hz, 0.4 A
Output: 12 V DC, 1A, 12 VA
116 x 190 x 117 mm
116 x 190 x 150 mm (incl. control knobs and antenna)
1.36 kg

Publicité

Table des Matières
loading

Produits Connexes pour BERNSTEIN PRA 30

Table des Matières