Operational Elements - BERNSTEIN PRA 30 Mode D'emploi

CONTENTS
1 x Bernstein PRA 30
1 x Power adapter 12V/1A
4 x Self-adhesive rubber feet
1 x Instruction manual (incl. warranty certificate)

OPERATIONAL ELEMENTS

FRONT OF THE UNIT
GB GB
Tuning knob (1)
Set the radio stations using the adjusting knob. The
left scale displays the transmission frequency for FM
and the right scale displays the frequency for MW.
The 5:1-ratio of the knob enables optimum
adjustment to the desired frequency. This is then
automatically maintained by the AFC (Automatic
Frequency Control) (FM).
LED display (2)
The LED glows green when the unit is switched on.
OFF/FM/MW/AUX knob (3)
Turn the knob to alternate between FM/MW, to
select the AUX mode or to switch off the unit (OFF).
Volume knob (4)
Used for adjusting the volume.
Headphone jack (5)
This is used for connecting stereo headphones with a
3.5 mm stereo jack. The headphone volume is
adjusted via the volume knob on the Bernstein PRA
30 unit. The PRA 30's speaker is disconnected when
the headphones are inserted. Set the volume to a low
level when connecting the headphones.
AUX input (6)
Used for connecting an external audio source (e.g.
portable CD player or MP3 player) with a 3.5 mm
stereo jack. The volume should be adjusted depending
on the connected audio source.