Hoover H-FREE 100 HF122DPT Guide De L'utilisateur page 10

Do not use the appliance to clean animals or people.
Do not replace the batteries with non-rechargeable batteries.
The Environment:
This appliance is marked according to the European directive 2011/65/EC on Waste Electrical and Electronic
Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by inappropriate
waste handling of this product. The symbol on the product indicates that this product may not be treated
as household waste. Instead it shall be handed over to the applicable collection point for the recycling of
electrical and electronic equipment. Disposal must be carried out in accordance with local environmental
regulations for waste disposal. For more detailed information about treatment, recovery and recycling of this product,
please contact your local city office, your household waste disposal service or the shop where you purchased the product.
This product complies with the European Directives 2014/35/EU, 2014/30/EU and 2011/65/EU.
CANDY HOOVER GROUP S.r.l. Via Privata Eden Fumagalli, 20861 Brugherio (MB) Italy
PRODUCT COMPONENTS
A. Main Body
B. Integrated Dusting Brush
C. Tube Release Button
D. Tube
E. Nozzle Release Button
F. Nozzle
G. Front Led Lights
H. Agitator Release Flap
I. Intense Floor Roller
J. Mesh Filter
K. Single Cyclone
L. Dust Bin
M. Dust Flap Release Button
N. Dust Bin Release Button
O. Crevice Cover Cap
P. Switch ON/OFF
Q. Switch Lever
R. Exhaust Filter Release Buttons
PREPARING YOUR CLEANER
1. Insert the nozzle head into one side of tube until you hear a "click"sound. [1a]
2. Insert the another side of tube into handheld until you hear a "click"sound. [1b]
3. Fix the wall mount to your wall using the screws and screw plugs provided. [2]
4. To fully charge the appliance, connect the charge jack plug to the removable battery pack. It will take around 6Hrs.
[2,3]
NOTE: To remove the nozzle press the nozzle release button and pull away from the main body.
NOTE: Use only the charger supplied with your cleaner to recharge.
IMPORTANT: When charging the cleaner, switch lever must be in the OFF position. You can charge the removable
battery pack also when released from the product.
It is normal for the charger to become warm to touch when charging.
* Certain Models Only
S. Exhaust Filter
T. Sponge
U. Exhaust Filter Frame
V. Battery Pack Led Light
W. Battery Pack Release Button
X. Battery Pack
Y. Charger
Z. Wall Mount *
AA. Screws Plugs *
AB. Crevice Tool
AC. Accessory Adaptor *
AD. Up To Top Tool *
AE. Radiator Tool *
AF. Deep Cleaning Brush *
AG. Mini-Turbo Nozzle *
AH. Long Flexible Crevice Tool *
AI. Accessory Bag*
3
GB