Publicité
Les langues disponibles
Les langues disponibles
Installation
Switching the door position
34
English
Untitled-1 34
To reverse the direction of the door, we
recommend that you contact a qualified
technician.
1. Put a soft rug on the floor to rest the
door on after you have removed it.
This will prevent the door from being
scratched.
2. Unplug the power cord of the dryer.
3. Remove the four hinge screws from
the door, and then remove the door by
lifting it up slightly.
4. Remove the two screws from the lever
holder, and then remove the holder
cover.
5. Put the lever holder on the other side
as shown, and then tighten the screws.
Install the holder cover on the opposite
side as shown.
6. Use a flat-head screwdriver to remove
the two hinge covers from the original
side. Install the hinge covers on the
opposite side as shown.
2020-12-11
3:33:23
Publicité
