Télécharger Imprimer la page

Robur 8150 Manuel D'instructions page 20

Publicité

Les langues disponibles

Les langues disponibles

The manual must be kept by the person in charge in a suitable place and readily available for
consultation, in optimal conditions. should it be lost or damaged, the manual can easily be retrieved
on the constructor's web site: www.beta-tools.com.
the constructor detains all material and intellectual rights on the manual, and restricts its
modification, albeit partial, for any commercial use.
As regards the information provided in these operating instructions, BETA UTENSILI SPA will accept
no responsibility in the event of:
• any use of the accessories other than the uses under national safety and accident
prevention laws;
• mistaken choice or arrangement of the apparatus they are going to be connected to;
• failure to comply with, or properly follow, the operating instructions;
• changes to the accessories;
• misuse or failure to carry out routine maintenance jobs;
• use with noncompliant accessories.
!CAUTION: The marking data on the label attached to the websling should always be perfectly
legible; any webslings that do not carry any identification references should be made unusable
and scrapped.
No characters other than the manufacturer's may be affixed.
The following parameters should be carefully considered in choosing the websling:
The weight of the load to lift should be lower than or equal to the working load limit (WLL)
recommended for the websling being considered, according to sling type, as printed on the product and
shown in Table "A".
Caution: the angle of each arm should never exceed 60° compared to the vertical (fig. 3).
Division of BETA UTENSILI SPA, Via Volta, 18 - 20845 SOVICO (MB) ITALY Tel. +39.(0)39.20771-Fax + 39.(0)39.2010742
4)
GENERAL WARNINGS
5)
SELECTION CRITERIA
5.A WORKING LOAD LIMIT
β MAX 60°
Fig. 3
7/13

Publicité

loading

Produits Connexes pour Robur 8150

Ce manuel est également adapté pour:

8150/5081538156815781588159 ... Afficher tout