Celestron Outland X 10x42 Mode D'emploi page 8

tripoD ADAptAbility
The 42 and 50 mm versions of the Outland X
binoculars feature built-in threads that allow
the binocular to be attached to a tripod using a
binocular tripod adapter. These threads can be
accessed by unscrewing the logo plate found
on the front of the hinge (Fig. 5). To attach the
binocular to a tripod, thread the adapter into
the binocular and attach the other end of the
adapter to a photographic tripod. Mounting the
binocular on a tripod allows for added stability
and comfort during prolonged viewing.
Fig. 5
WAterprooF / FogprooF
The Outland X series binoculars are waterproof
and filled with dry nitrogen gas to prevent the
housing from fogging internally.
I ENGLISH
6