APsystems EZ1-M Mode D'emploi page 5

Step 1: Verify that grid voltage matches microinverter rating
Do NOT carry the microinverter by the
AC cable. This may cause the AC cable to
partially or fully disconnect from the unit,
resulting in no or poor operation.
Step 2: Install the microinverters in proper position
The Microinverter EZ1 can be installed on the balcony wall or fixed to the
railing using cable ties. Select an appropriate installation method based on
your actual scenario to ensure that the EZ1 is securely installed.
NOTE: Install the microinverters in proper position to avoid direct
exposure to rain, UV or other harmful weather events.
EN
2