Publicité
6.2.3
Alertes de signal de la manette
Lorsque le Solo vole derrière des objets solides, comme des bâtiments et des arbres, les signaux de communication
sont bloqués entre le Solo et la manette. Maintenez toujours un contact visuel avec le Solo pour vous assurer
que le signal ne rencontre aucun obstacle. Les antennes-relais et les signaux Wi-Fi voisins peuvent causer des
interférences avec le système de communication et diminuer sa portée. Évitez de voler dans des secteurs à forte
densité de population pour éviter les sources d'interférence.
Quand la manette n'est plus jumelée au Solo pendant le vol, elle affiche l'alerte suivante et le Solo retourne à la
base. Voir la section 9.3 pour des instructions sur le jumelage.
Quand le signal entre le Solo et la manette est perdu pendant le vol, la manette affiche l'alerte de signal de manette
perdue et le Solo retourne à la base. Quand le signal est récupéré lors du retour à la base, la manette affiche l'alerte
de signal récupéré et offre l'option de reprendre le contrôle manuel en appuyant sur le bouton Fly.
6.2.4
Alertes de signal GPS
Quand le signal GPS est perdu pendant le vol, Solo passera en mode Fly: Manual (manuel). En cas de perte du
signal GPS, nous recommandons de faire atterrir le Solo et d'attendre d'acquérir la localisation GPS avant de
redécoller.
Dans la Fly:Manual (manuel), le Solo utilise les mêmes commandes de joystick qu'avec le vol standard (affiché en
tant que « Fly »), mais n'inclut aucun positionnement GPS. Par conséquent, en mode Fly:Manual (manuel), le Solo ne
maintiendra pas sa position quand le joystick droit est relâché et vous devrez maintenir un contrôle strict du roulis,
du tangage et du lacet. Sans GPS, les options Pause, Return Home, and Smart Shots ne sont pas disponibles.
Pendant l'atterrissage, le Solo ne pourra pas maintenir sa position en raison de l'absence de positionnement GPS
et dérivera en fonction du vent et d'autres conditions environnementales. Quand une autre alerte se produit tandis
que Solo est en mode Fly:Manual (manuel), le Solo ne pourra pas retourner à la base et lancera un atterrissage non
positionné à l'endroit actuel.
12
FLY
FLIGHT BATTERY
HOME
48
All manuals and user guides at all-guides.com
324
FT
IN-FLIGHT BANNER ALERTS
ALTITUDE
%
84
FT
12
FLY
3DR Solo app connected
FLIGHT BATTERY
48
%
12
FLY
FLIGHT BATTERY
HOME
48
324
3DR Solo app connected
FT
ALTITUDE
%
84
FT
12
FLY
3DR Solo app disconnected
FLIGHT BATTERY
48
Figure 6.2.2.1: Manette - Alertes de connexion d'application
%
12
FLY
FLIGHT BATTERY
HOME
48
324
3DR Solo app disconnected
FT
ALTITUDE
%
84
FT
12
FLY
Landing complete
FLIGHT BATTERY
48
%
12
Disconnected
FLIGHT BATTERY
HOME
48
Landing complete
324
FT
ALTITUDE
%
84
FT
12
Disconnected
Disconnected from Solo
FLIGHT BATTERY
48
IN-FLIGHT ALERTS: CONTROLLER RELATED
%
Disconnected from Solo
Figure 6.2.3.1: Manette - Alerte de contrôleur déconnecté
Control stick
Control stick
error
error
Solo will return home
Solo will return home
Controller
signal lost
Solo will return home
Figure 6.2.3.2: Manette - Alertes de signal de la manette
Signal
recovered
Controller
signal lost
Emergency landing started
System self-calibrates altitude after altitude disparity
Alert persists until:
System self-calibrates (sys then continues sensor check)
Timeout: after 1 minute (?) (results in "sensor error" screen)
Solo app connected (Banner)
System self-calibrates altitude after altitude disparity
Alert persists until:
HOME
IN-FLIGHT BANNER ALERTS
324
System self-calibrates (sys then continues sensor check)
FT
Timeout: after 1 minute (?) (results in "sensor error" screen)
ALTITUDE
Solo app disconnected (Banner)
84
12
FLY
System self-calibrates altitude after altitude disparity
FT
Alert persists until:
FLIGHT BATTERY
HOME
48
324
System self-calibrates (sys then continues sensor check)
FT
Timeout: after 1 minute (?) (results in "sensor error" screen)
ALTITUDE
%
84
FT
Solo app disconnected (Banner)
System self-calibrates altitude after altitude disparity
3DR Solo app connected
Alert persists until:
HOME
324
System self-calibrates (sys then continues sensor check)
FT
Timeout: after 1 minute (?) (results in "sensor error" screen)
ALTITUDE
12
84
FLY
Landing Complete
FT
Screen showing automatic landing is complete
FLIGHT BATTERY
HOME
48
Alert persists until:
324
FT
TIMEOUT: 3000 milliseconds
ALTITUDE
%
84
FT
Landing Complete
Screen showing automatic landing is complete
3DR Solo app disconnected
Alert persists until:
HOME
324
TIMEOUT: 3000 milliseconds
FT
ALTITUDE
IN-FLIGHT ALERTS: CONTROLLER RELATED
12
84
FLY
Controller connection poor (Banner)
FT
Appears once connection strength is below average performance
FLIGHT BATTERY
HOME
48
324
for X time.
FT
TIMEOUT: After 3000 milliseconds
ALTITUDE
%
84
FT
Controller connection poor (Banner)
Control stick
Control stick
error
error
Landing complete
Appears once connection strength is below average performance
for X time.
HOME
Solo will return home
Solo will return home
324
TIMEOUT: After 3000 milliseconds
FT
ALTITUDE
84
12
Disconnected
FT
FLIGHT BATTERY
HOME
48
324
Controller Value out of Range
12
User is asked to contact customer support
FT
ALTITUDE
Alert persists until:
%
FLIGHT BATTERY
48
84
TIMEOUT: 5000 milliseconds
FT
go to persistent hint-box message
Controller
signal lost
Disconnected from Solo
(persistent until reboot)
Solo will return home
Contact 3DR Support after landing
RC Failsafe
Controller signal lost, RTH screen
Alert persists until:
TIMEOUT: 5000 milliseconds
Signal
recovered
RC Signal Recovered
User can press Fly to recover
Alert persists until:
User presses Fly and enters Fly mode
HAPTIC: 40millisecond so user is aware that they can take control
Controller
signal lost
Emergency landing started
RC Failsafe (No GPS)
Controller signal lost,
emergency land screen
Alert persists until:
TIMEOUT: 5000 milliseconds
Solo app connected (Banner)
System self-calibrates altitude after altitude disparity
Alert persists until:
System self-calibrates (sys then continues sensor check)
Timeout: after 1 minute (?) (results in "sensor error" screen)
Solo app disconnected (Banner)
System self-calibrates altitude after altitude disparity
Alert persists until:
System self-calibrates (sys then continues sensor check)
Timeout: after 1 minute (?) (results in "sensor error" screen)
Landing Complete
Screen showing automatic landing is complete
Alert persists until:
Controller Value out of Range
12
TIMEOUT: 3000 milliseconds
User is asked to contact customer support
Alert persists until:
FLIGHT BATTERY
48
TIMEOUT: 5000 milliseconds
go to persistent hint-box message
(persistent until reboot)
Contact 3DR Support after landing
Controller connection poor (Banner)
Appears once connection strength is below average performance
for X time.
RC Failsafe
TIMEOUT: After 3000 milliseconds
Controller signal lost, RTH screen
Return Home
Alert persists until:
HOME
324
TIMEOUT: 5000 milliseconds
FT
ALTITUDE
%
84
FT
Control stick error
RC Signal Recovered
User can press Fly to recover
Alert persists until:
User presses Fly and enters Fly mode
HAPTIC: 40millisecond so user is aware that they can take control
RC Failsafe (No GPS)
Controller signal lost,
emergency land screen
Alert persists until:
TIMEOUT: 5000 milliseconds
Return Home
HOME
324
FT
ALTITUDE
%
84
FT
Control stick error
34
Publicité
