Pineware PDSH02 Instructions page 7

when the hotplate reaches the selected temperature. The indicator light will
cycle on and off during cooking in order to maintain the selected temperature.
Note: the hotplate is equipped with an overheat protection device – however it is
advised not to use the hotplate for longer than one (1) hour.

To turn the hotplate off, turn the heat control dial in an anti-clockwise direction
until the "0" is in the upright position.

Turn off the switch at the power supply and unplug the unit from the power
supply.

Wait for the unit to cool down completely and then wipe clean with a damp cloth.
NOTE: Never operate the unit without pots or pans correctly in place on top of the
plates of the hotplate.
CLEANING AND MAINTENANCE

This appliance is for household use only and is not user-serviceable.

Do not open or change any parts by yourself. Please refer to a qualified electrical
service department or return to the supplier if servicing is necessary.

Always remember to unplug the unit from the electrical outlet when not in use
and before cleaning. Ensure that the heat control dial is set to "0".

The body of the appliance and the stand should be cleaned with a damp cloth.
Do not let water enter the appliance.

Do not use bleach or other abrasive substance or solvents to clean your
appliance as it can be damaging to the finish.

Do not immerse the appliance in water or any other liquid, or hold it under a
running tap to clean.

To remove stubborn spots/marks, wipe the surfaces with a cloth slightly
dampened in soapy water or mild non-abrasive cleaner. Rinse and dry a clean,
dry, soft cloth.
STORING THE APPLIANCE

Unplug the unit from the wall outlet and clean all the parts as instructed above.
Ensure that all parts are dry before storing.
7