Publicité
Annexe
Manual statements revised on 2022-08-19
For Bus coupler, Bus controller for 24V system supply input voltage an external fuse, ra-
ted max. 2A, slow acting, min. 30Vdc shall be used.
For field supplied Module (also supplied by Power jumper contacts) for 24V field supply
input voltage an external fuse, rated max. 10A, slow acting, min. 30Vdc shall be used.
For field supplied Module (also supplied by Power jumper contacts ) with field supply in-
put voltage up to 250Vac/Vdc an external fuse, rated max. 10A, slow acting, related to
the appropriate voltage shall be used.
For products Module Nos. 750-750-495, 750-495/000-001 750-495/000-002,
750-495/040-000, 750-495/040-001, 750-495/040-002 for Voltage measurement inputs
Three-phase, three-wire system: 600 Vac:
The Neutral shall not be connected. Neutral conductors as part of the mains circuit, shall
be considered hazardous live. No PI in Neutral provided.
With distance module mounting (eg. Module Nos. 750-616) with a width of 12 mm. Addi-
tional Supplementary insulation shall be provided.
For Models 750-439/040-000, 750-481/040-000, 750-484/040-000, 750-486/040-000,
750-489, 750-535/040-000, 750-585/040-000, 750-586/040-000, and 750-633/040-000:
Shall only be operated with a power supply 24 Vdc Diagn for Ex I XTR Modules
750-606/040-000.
10.1.2.3 UL Ordinary Locations according Report Reference E175199-20181019
Remarque
Règles d'installation en vigueur
Si le produit a été fabriqué avant le 19 août 2022, les réglementations d'installation sous-
jacentes sont couvertes par la notice et les manuels du produit de l'époque.
Les informations suivantes sont destinées à être utilisées dans le cadre de directives,
normes ou certificats spécifiques à une langue et sont donc exclusivement reproduites
dans la langue d'origine correspondante.
Manual statements revised on 2022-07-12
For Bus coupler, Bus controller for 24V system supply input voltage an external fuse, ra-
ted max. 2A, slow acting, min. 30Vdc shall be used.
For field supplied Module (also supplied by Power jumper contacts) for 24V field supply
input voltage an external fuse, rated max. 10A, slow acting, min. 30Vdc shall be used.
For Module No. 750-8211, 750-8211/040-000, 750-8211/040-001:
These devices are to be used with Optical Transceivers / SFP modules as prescribed in
the Installation instructions of WAGO. Such SFP modules need to be in compliance with
Laser Class I in accordance with 21 CFR 1040 and rated max. 1 W Neutral shall not be
connected. Neutral conductors as part of the mains circuit, shall be considered hazardous
live. No PI in Neutral provided.
62
Manuel du système | Version: 3.3.4
Série 750, 753
Publicité
