Beko HII64200SMT Manuel D'utilisation page 25

Error codes/reasons and possible solutions
Error codes
E 2
E 22
E 26
E 46
E 47
E 1 – E 15
E 16 – E 21
E 23
E 24
E 25
E 31 – E 45
E 48
E 49
E 51
E 52 – E 57
Error reasons
Communication error between Dis-
play and Knob Interface board
Induction hob is overheated.
One or more keys are kept pressed
for more than 10 seconds.
An object is left on the control panel
or the control is exposed to vapour.
A pot suitable for induction heating is
not used.
Communication error on induction
hob.
Temperature sensor error on induc-
tion hob.
Software error on induction hob.
Fan operation error on induction hob.
Electronic board hardware error on in-
duction hob.
Sensor error on induction hob.
High temperature error on induction
hob.
EN / 25
Possible solutions
Turn the induction hob off and oper-
ate again after 30 seconds. Contact
the authorized dealership if the issue
is resumed
Turn the induction cooker off and
wait until it is cooled down. The error
shall be resolved when temperature
of the hob comes down below the
limits.
The problem shall be resolved when
you remove your hand from the hob.
The problem shall be resolved when
the control panel is cleaned.
The error shall be resolved when a
pot suitable for induction heating is
used.
Turn the induction hob off and oper-
ate again after 30 seconds. Contact
the authorized dealership if the issue
is resumed.
Turn the induction hob off and oper-
ate again after 30 seconds. Contact
the authorized dealership if the issue
is resumed.
Turn the induction hob off and oper-
ate again after 30 seconds. Contact
the authorized dealership if the issue
is resumed.
Turn the induction hob off and oper-
ate again after 30 seconds. Contact
the authorized dealership if the issue
is resumed.
Turn the induction hob off and oper-
ate again after 30 seconds. Contact
the authorized dealership if the issue
is resumed.
Sensor equipment shall be rendered
compatible for the operating condi-
tions. Contact the authorized dealer-
ship if the issue is resumed.
Turn the induction hob off and wait
until it is cooled down. The error shall
be resolved when temperature of the
sensor comes down below the limits.
Contact the authorized dealership if
the issue is resumed.
EN
DE
FR
NL