Konwin OH907 Manuel Du Propriétaire page 9

1. Place the product on a rm, level surface.
2. Plug the unit directly into a 120 V AC electrical outlet.
the POWER KNOB to select between I , II and
3.
III .
I position operates the heater at 600 watts conserving
energy, II position 900 watts, and III position operates the
heater at a maximum 1500 watts.
Turn the THERMOSTAT KNOB clockwise to the highest
4.
setting.
5. When the room reaches a comfortable temperature,
slowly turn the THERMOSTAT KNOB counter-clockwise
until the heating element clicks OFF.
6. This is the point at which the Thermostat setting equals
the room temperature. At this setting, the Thermostat will
automatically turn the heater ON and OFF to maintain the
selected temperature.
7. Turn the POWER KNOB to OFF and unplug the heater
when ished using.
9
Thermostat