Konwin OH907 Manuel Du Propriétaire page 11

If the heater will not operate, please check the following:
1. Check if the power cord is plugged into an electrical
outlet. If not, plug in unit to appropriate outlet.
2. Check if electricity to the outlet is working
3. Ensure power is turned to ON position.
4. Make sure heater is placed o
5. See SAFETY FEATURES section for additional information.
6.
Turn the THERMOSTAT KNOB clockwise. The heater only
works when the set temperature is higher than room tem-
perature.
NOTICE
The product is equipped with an overheat safety feature
protector which will switch off the heater in case of accidental
over heating (ex. Obstruction of air intake and outlet grills,
motor turning slowly or not at all).
solid surface.
11