Konwin OH907 Manuel Du Propriétaire page 10

MAINTENANCE
1.
Turn the POWER OFF.
2.
Unplug the unit and let it cool completely.
3.
To keep the heater clean, the outer shell may be cleaned with a
soft, damp cloth. A mild detergent can be used if necessary.
4.
After cleaning, dry the unit with a soft cloth.
5.
Wait until the unit is completely dry before use.
WARNING
•
DO NOT let liquid enter the heater.
•
DO NOT use alcohol, gasoline, abrasive powders, furniture
polish, or rough brushes to clean the heater. This may cause
damage or deterioration to the surface of the heater.
•
DO NOT immerse the heater in water.
•
The heater must not be located immediately below a socket
outlet
•
Do not use this heater in the immediate surroundings of a
bath, a shower or a swimming pool.
•
This heater is filled with a precise quantity of special oil.
Repairs requiring opening of the oil container are only to be
made by the manufacturer or his service agent who should be
contacted if there is an oil leak;
•
when scrapping the heater, follow the regulations concerning
the disposal of oil.
STORAGE
1. Save the original box for off-season storage.
2. Clear the heater with a soft, damp cloth.
3. Remove the Base Feet.
4. Place the Radiator and Base Feet in the original box, and
store in a cool and dry place.
5. The the heater is stored fully assembled, ensure it is covered
to protect from the dust.
.
10