Moulinex PerfectMix BL8111 Mode D'emploi page 59

• Use the automatic auto clean program to carry out a prewash of the jug.
• Once the program has stopped, unplug the appliance.
• Remove the blender jug (F4)
• Place the jug on a flat surface.
• Unlock the lid and remove it with care. Pour out the water.
• Remove the blade unit (F1+F3) and clean them under running water.
The blades are very sharp, handle them with caution to avoid injury
(Fig. 10).
• After cleaning, remember to correctly fit the seal (F3) back onto the
blade unit (F1) (Fig. 11). Please be careful to avoid any damage to the
seal by touching the blades.
Note: Incorrectly fitting the seal can result in ingredients leaking from
the base of the blender jug.
• Finish cleaning the jug with a damp cloth or sponge.
• Rinse the inside of the jug and the lid under running water.
• Take care when cleaning the blades in the blender jug and when you
empty the jug as they are sharp.
• Use a damp cloth to clean the motor unit (A). Dry it carefully.
• The detachable parts (lid, blade unit, locking ring,) can be cleaned with
a sponge and hot soapy water.
• The jug (F4), blade unit (F1) (but not the seal (F3)), locking ring (F2)
can be cleaned in the dishwasher on the upper rack - use the 'ECO' or
'LOW SALT' program.
• Caution: The jug (F4), blade unit (F1) and locking ring (F2) must be
disassembled and placed separately in the dishwasher. Please do not
put the seal (F3) in the dishwasher.
10
EN
11
59