Moulinex PerfectMix BL8111 Mode D'emploi page 55

• Do not operate the appliance if the lid is not in place.
ASSEMBLING AND FITTING THE JUG
Moisten the seal (F3) (even if already fitted on the blade unit (F1)).
Be careful to correctly fit the seal (F3) back onto the blade unit (F1) the
correct way up (Fig 11).
• Check the seal is in place on the blade unit.
• Turn the jug upside down and place the blade unit on the base of the
jug (Fig 1).
• Fit the locking ring (Fig. 2) and lock it by rotating it through a quarter
turn in the clockwise direction.
• Make sure the locking ring is locked correctly : the two arrows must be
aligned (Fig 3).
• Add the ingredients to the assembled jug without exceeding the
maximum level indicated:
* 1.5 L for thick mixtures
* 1.25 L for liquid preparations
Warning : Do not pour boiling liquids (over 80°C/176°F) into the jug.
• Fit the lid (F5) on the jug (Fig. 8). To avoid any splashes during blending
make sure that the curved tabs on the lid are aligned with the spout and
handle (Fig. 9) . Fit the measuring cap (F6) in the hole on the lid (Fig. 8)
USING YOUR BLENDER
• Once the blender jug is locked correctly on the motor unit, plug in the
appliance. The lights on the appliance flash twice and you hear a beep.
Turn it on using the desired function.
• Speed selection: Turn the control knob (E) to choose the desired speed;
the speed increases gradually between min and max. The intensity of
the lights on the appliance increase gradually as the speed increases.
You can change the speed as required during preparation.
• "Pulse" function: Turn the control knob (E) to the "Pulse" position. Using
a succession of pulses gives finer control for precise preparations. In
this position, the appliance starts directly on maximum speed. It stops
as soon as you release the knob. The light remains on when the pulse
function is in use.
EN
55