Plumbing Installation
Locate the 3 pre slotted holes in the back of the cabinet.
Using tin snips cut small webs to release the knockouts.
Locate the 3 pre slotted holes in the bottom
of the cabinet.
Using tin snips cut small webs to release the knockouts.
perform installation
Connect the braided water inlet
lines hot and cold to the supply
lines.
10mm
3/8" COMP Female hose end
3/8" COMP male valve end
Sink Specific Instructions
Back View of Sink Cabinet.
1 2 3
Bottom View of Sink Cabinet.
Connect the drain trap adapter to
a p-trap and drainage tubing.
1 1/2"NPT
male drain
pipe
Elbow/ P- Trap
19