Publicité
Les langues disponibles
Les langues disponibles
Assembly
The 61 in. Hutch and Riser Cabinet is designed to speci cally t only on the Husky 61 in. 15-Drawer Heavy Duty Workbench
Model # H61MWC15HP
SKU # 1005517358
The wood top on the H61MWC15HP will be reused as the top for the 2-Drawer Riser Cabinet.
1
Remove the wood top
1. Unscrew 8 bolts from the wood top of the H61MWC15HP cabinet, but DO NOT DISCARD the bolts.
2. Remove the wood top.
2
Drilling holes on the wood top
1. Align and x the Template (AA) on the right side of the wood top, over the two existing holes.
2. Use a 3/8 in. diameter drill bit to drill cleanly through the wood top.
3. Flip the Template (AA) over and repeat this procedure on the left side.
CAUTION:
Existing holes
for positioning
6
Two people are recommended for assembly.
Drill
dia. holes
3/8 in.
AA
Publicité
