A LARGER INVERTER MAY BE REQUIRED
To determine whether the ERP3500-12 will operate a particular piece of equipment or
appliance, run a test. All inverters are designed to automatically shut down in the event
of a power overload. This protection feature prevents damage to the unit while testing
appliances and equipment with ratings in the 3500 watt range.
If an appliance in the 3500 watt range will not operate properly when fi rst connected to
the inverter, turn the switch ON (I), OFF (0),and ON (I) again a quick succession. If this
procedure is not successful, it is likely that the inverter does not have the required capacity
to operate the appliance in question.
IMPORTANT
•
PowerBright™
Y our
attempt to connect the inverter to any other power source, including any AC power source.
•
Do not attempt to extend or otherwise modify the connector cables provided with you
inverter.
•
220 volt of current can be lethal. Improper use of your inverter may result in property
damage, personal injury or loss of life.
P A G E 4
inverter is designed to operate from a 12 volt power source only. Do not