Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Noise
As with all fan driven appliances the stove will make some noise due to the occurrence of air flow;
this is perfectly normal.
Maintenance
Before any maintenance/cleaning is undertaken always disconnect the stove from the power supply
and allow to cool down.
Replacing light bulbs
Remove the coal or the pebbles from the internal support then remove the support by removing the screw pro-
vided as shown in figure.
Please note that replacement bulbs are not covered by the guarantee of the product.
IMPORTANT: replace light bulbs only with 40W E26 (screw type) 120V rated.
The product is provided with one spare light bulb in the package.
Cleaning
The stove can be cleaned with a soft damp cloth. Do not use metal polish or harsh scouring agents.
PROBLEM SOLVING
No power to the fire
No Illumination/ flame effect
Heater cuts out/ poor or no
flame effect
Check the electrical outlet, plug and
fuse.
Check if the flame effect is switched
on. Check that the bulbs are wor-
king.
Check that airflow around the stove
is not obstructed or the product is
covered in anyway.
5
Publicité
Table des Matières
