GOAL ZERO Yeti PRO 4000 Guide De L'utilisateur page 14

NOTE: 1800W is the maximum output of most household AC wall outlets. If you're
powering other loads from this same circuit, you may trip your home breaker and
thus need to reduce your charge speed. To do this, slide the Charge Speed switch
to the "Low" position. This will reduce the charge rate to 400W. Reducing charge
speed will also reduce fan noise. You can also customize your Low speed AC charge
rates in the Goal Zero app.
Input Limit
Switch
Solar Charging
The Yeti PRO 4000 has two DC inputs: The 8mm Low Voltage Input and the HPP+
High Voltage Input.
The Low Voltage DC Input can input a maximum of 275W at 28V. This input is for
smaller, single panel applications.
The HPP+ High Voltage Input can input a maximum of 3000 Watts up to 145V.
If you plan to use Goal Zero portable solar panels and do not plan to exceed 600W
of total solar input, use the 4:1 HPP Parallel Combiner Cable (SKU 98061). This
will allow you to connect any four Goal Zero solar panels together for a maximum
600W of solar input.
10