Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION INSTRUCTIONS
KEG SIZES
When installing a single keg, the keg cooler can
accept domestic kegs up to 16-1/8" in diameter
and up to 23-3/8" in height.
When installing dual kegs, the keg cooler can
accept domestic kegs up to 9-1/4" in diameter
and up to 23-3/8" in height. Dual kegs should be
placed in the refrigerator at an angle so that they
both fi t, as illustrated.
CASTER INSTALLATION INSTRUCTIONS
Install the four casters. The two locking casters
should be placed at the front. Four screw holes have
been pre-drilled into the bottom of the cabinet at
each corner for each caster. Put the plastic washers
provided on the front casters before installing them.
CASTOR BRAKES
The two front casters are supplied with brakes to ensure the appliance does not move excessively while
being used. It is recommended to engage the brakes while the appliance is in use to avoid damage to the
appliance, the contents or personal property.
Note: The refrigerator
compartment cannot
accommodate the
"Coors" style beveled
barrel keg.
Step on to brake
23 3/8"
23 3/8"
9 1/4"
7
16 1/8"
18 5/8"
9 1/4"
Step on to
release brake
Publicité
