Publicité
Les langues disponibles
Les langues disponibles
DRC8335_EN(verB)
7/23/07
3:36 PM
DVD playback
Discs for playback
DVD Video discs with region
code 1 or ALL
DVD±R/RW discs, DVD±R discs
(the discs must be finalized
for playback)
CDs (Audio CDs, CD-R, CD-RW,
mp3, jpeg discs)
Video CD discs (VCD, SVCD)
Discs for recording (DVD±R/RW) are not assigned region
numbers.
Y ou cannot play the following types of discs: Laserdiscs,
CD-I, CD-ROM (computer only discs), discs recorded using
other broadcast standards (i.e. PAL or SECAM), or DVD-
RAM discs.
Some discs may not be compatible due to laser pickup
and disc design.
Make sure the DVD is selected with the VCR
indicator turned OFF when using the remote control
to perform the below operations. If the indicator is on,
press
on the remote control to activate the DVD.
Basic playback
1. Tune the TV to the AV channel connected with the unit.
2. Press STOP/OPEN (on the unit) or
remote control) to open the disc tray.
3. Insert a disc in the disc tray. Press
unit) or
the disc tray.
4. Press
AY/PAUSE
(on the unit, under the disc tray) or
AY (on the remote control) to start playback.
5. Press STOP/OPEN (on the unit) or
control) to stop playback.
6. Press STOP/OPEN (on the unit) or
remote control) to open the disc tray.
The unit remembers the stopped point on a disc. When
the disc starts to play again, the unit picks up from the
stopped point unless the disc is unloaded or the unit is
unplugged, or the
STOP key is pressed twice.
Page 21
All manuals and user guides at all-guides.com
VCR
Press this
indicator
button
(on the
STOP/OPEN (on the
(on the remote control) to close
STOP (on the remote
(on the
Open/close key
Repeat key
Menu key
DVD selection key
Playback control keys
DVD control keys
EN
19
Publicité
