Publicité
Les langues disponibles
Les langues disponibles
FAULTS
Symptom
Appliance makes a noise.
Ice building up.
The LED lighting does not
work.
The door does not open
easily.
Note
It is normal for the cooling circuit to make gurgling or expansion noises.
If you are unable to solve the problem then contact the service centre. When you do so, state the
type, model and serial number shown on the type plate or label on the inside of the appliance.
EN 22
Possible cause
Incorrect positioning of food
in the appliance.
There is an object against the
appliance.
Freezer compartment door
not closed properly.
The door seals are dirty or the
seals are damaged.
Door seals not installed
correctly.
LED-lamp faulty.
You are trying to open the
appliance's door just after you
have closed the door. Then
opening the door is difficult.
When you open the door, cold
air escapes from the appliance
and is replaced by warm air
from the surroundings. As this
air cools a slight vacuum is
created that makes it more
difficult to open the door.
Solution
Place foods in the proper
manner in the appliance.
Remove the object.
Make sure that the door is
closed properly.
Clean the door seals. Call
the service centre if the door
seals are damaged.
When changing the direction
of rotation of the door, the
door seal must be turned
180°. Check if this is correct.
Consult a service technician
about LED lighting that is not
working. For safety reasons,
you are not allowed to repair
LED lighting yourself.
This product contains a light
source of energy efficiency
class F.
The situation returns to normal
after a few minutes, and the
door opens easily again.
Publicité
