Nakamichi Cassette Deck 1.5 Mode D'emploi page 8

Operation
Playback
® To stop playback
Press the L__]} button.
& To temporarily interrupt playback
Press the LU) button.
To resume playback, press the > button.
© To fast-forward the tape
Press the >> button.
@ To rewind the tape
Press the << button.
@ Auto Monitor function
This unit incorporates an auto monitor function which auto-
matically switches the output signal depending on the opera-
tion mode.
When the > button is pressed, the "Tape" position is auto-
matically selected. To listen to the source signal, press the
Monitor button once.
& To reset the counter to 0000
Press the Counter Reset button.
@ Auto repeat
Set the Repeat/Timer selector to Auto
Repeat. When
the
tape reaches
the end,
it is automatically rewound,
and
playback
starts again.
To disable the
function, set the
Repeat/Timer selector to Off.
® To check the contents of a tape
This unit incorporates a program check function which is acti-
vated by pressing the >> or << button twice. Fast-forward
and playback (or rewind and playback) are then carried out
alternately for five seconds each.