Publicité
Les langues disponibles
Les langues disponibles
S T E P T H R E E
Hinges and Latch Installation
Align the hinges on the top and bottom horizontal rails as
Pre-drill two holes on the face of the horizontal rails for each
hinge as shown. Holes should be approximately 1/4" from the
edge of the rail as shown.
Fasten each hinge with two screws.
2
Align the finger latch to the top horizontal rail and pre-drill
four holes into the rail as shown.
Fasten four screws to lock the finger latch in place.
1
W
shown.
2
3
3
4
5
1
4
M a d i s o n Vi n y l G a t e K i t w / F e n c e Wi n g s I n s t r u c t i o n s
1/4 in
5
5
Publicité
