Publicité
Les langues disponibles
Les langues disponibles
English
Troubleshooting
There is no power
• Power adaptor is not connected correctly.
• No power at the power outlet.
• To help save power consumption, some models will comply with ERP energy
saving standard. When there is no audio input for 20 minutes, their powers will
automatically cut-off. To turn power back on and resume playing, turn off the power
and turn it on again.
Power is on, but the platter does not turn
• Turntable's drive belt is not installed or has slipped off.
Turntable is spinning, but there is no sound, or sound not loud enough
• Stylus protector is still on.
• Tone arm is lift up by the lever.
Record sounds too fast or too slow.
• Wrong speed selected for the record.
Strong hum on phono input
• The cable is not grounded correctly.
There is no sound
• Make sure the volume is turned up.
• Make sure the volume on your third party device is turned up.
11
Publicité
