Safety; General Safety Instructions; Instructions, Standards And Regulations; Appliance Description - Stiebel Eltron FFB 4 EU Utilisation Et Installation

INsTALLATIoN

Safety

INsTALLATIoN
6. Safety
6.1

General safety instructions

We guarantee trouble-free functional and operational reliability
only if original accessories and spare parts intended for the ap-
pliance are used.
6.2

Instructions, standards and regulations

Note
Observe all applicable national and regional regulations
and instructions.
7.

Appliance description

Standard delivery
Standard delivery of the wireless remote control includes:
- Battery (inside device)
- Wall mounting bracket with adhesive pad
www.stiebel-eltron.com
8. Installation
The wireless remote control with wall mounting bracket is suitable
for installation on even walls (for the range within a building, see
chapter "Specification / Data table"). The wall mounting bracket
can be fixed to smooth walls with the adhesive pad. Alternatively,
it is possible to attach the wall mounting bracket with screws.
9.

Pairing the wireless remote control

Pairing
A new wireless remote control is paired as follows:
f Select the following menu items on the programming unit of f
the instantaneous water heater: "Settings / Service / Wire-
less / Log on other wireless subscribers". A popup appears
to indicate that the device is ready to be paired; confirm this
with OK.
f Press and hold keys "1" and "2" for 3 seconds. Pairing takes f
place automatically and is acknowledged when "L" is shown
on the display.
Note
When pairing and forgetting the wireless remote control,
see also the operating instructions for your instantaneous
water heater.
FFB 4 EU | 19