Télécharger Imprimer la page

Candy FCNE825XL Notice D'emploi Et D'installation page 7

Publicité

Les langues disponibles

Les langues disponibles

ELETTRONICA ZERO WIFI FUNCTION
For all the details related to the link between app and product, refer to the Quick Guide.
The Quick Guide is available on: go.candy-group.com/candy-ov
Wi Fi has two different positions on the cooking selector:
• Wi Fi on: Wi Fi is switched on only if the oven is already enrolled to your device. In this position the oven will be only controlled by
remote.
• Wi Fi reset: After leaving the selector on Wi Fi reset for 30", Bluetooth will switch on and you will be able to enroll the oven to your
device within 5'.
If the enrollment is successful, the oven will be controlled by remote and the Wi Fi icon will switch on. If the enrollment is unsuccessful,
Wi Fi will switch off and the oven will be reset.
To proceed with a new enrollment the cooking program selector has to be turned out from Wi Fi reset position and moved again on it.
Note: Install the App on your device before starting enrolling
Note: The device where the App is installed must have Bluetooth activated
Note: For both Wi Fi positions, the touch buttons do not work.
Note: It is important to establish a good Wi-Fi signal strength between the home router and the appliance. When the oven is trying to
connect to router the icon will blink 3" on and 1" off, when it is already connected the icon will switch on.
CANDY SIMPLY-FI:
For detailed information about HOW TO CONNECT your simply-Fi appliance and HOW TO USE it at its
best, go to http://www.candysimplyfi.com
1. Program selection / 2. Program duration / 3. Cooking start setting / 4- Dedicated recipes selection / 5. Offline and vocal assistant /
6. Tips, suggestions and online user manual
Wi-Fi Parameters & Product Information for Networked Equipment
Technology
Standard
Frequency Band(s) [MHz]
Maximum Power [mW]
Product information for networked equipment
Power consumption of the product in networked
standby if all wired network ports are connected
and all wireless network ports are activated:
How to activate wireless network port:
How to deactivate wireless network port:
Wi-Fi
BLE
IEEE 802.11b/g/n
Bluetooth v4.2, BR/EDR/, BLE
2401÷2483
2402÷2480
100
10
2,0 W
Starting from an oven that is not enrolled, putting the
right knob on the Reset position. Wifi module is
switched on after 30".
If oven is enrolled with WiFi off, putting the right
knob on WiFi position the WiFi module is switched
on.
If oven is enrolled, putting the right knob on Reset
position the WiFi module is switched off.
EN 07
1
2
3
4
6
5

Publicité

loading