Rockford Fosgate Power Serie Installation Et Fonctionnement page 10

S
PECIFICATIONS
MODEL – POWER
Continuous Power Rating (RMS) - Measured at 14.4 Battery Volts
4Ω Load Mono
2Ω Load Mono
Signal-to-Noise Ratio
Crossover Slope
Crossover Frequency
Dimensions: (with Endbell)
Height
Width
Length
Frequency Response
Bandwidth
Damping Factor @ 4Ω (at output connector )
Slew Rate
IM Distortion (IHF)
Source Unit Compatibility (+15dB gain overlap)
Acceptable Signal Voltage Range
Protection
Battery Fusing Rates (External to Amplifier)
Fuse Type
Equalization (45Hz Punch Bass)
Input Impedance
Specifications subject to change without notice
10
>100dB A-weighted
24dB/octave Butterworth
variable from 50Hz to 250Hz
9.85" (25.02cm)
11.07" (28.12cm)
20Hz to 20kHz ±0.5dB
10Hz to 200kHz ±3dB
17V max. (low level in)
Variable from 250mV to 6V (RCA)
NOMAD - Internal analog-computer output protection
circuitry limits power in case of overload. Thermal
switch shuts down the amplifier in case of overheating.
Variable from 0dB to +18dB @ 45Hz
351M
175 Watts
350 Watts
2.38" (6.05cm)
>200
30 Volts/ms
<0.05%
40 amps
ATC
20k ohms