vigo TITUS VG05002 Mode D'emploi page 4

PACKAGE CONTENTS
ASSEMBLY INSTRUCTION
NOTE: INSTALLATION MUST BE DONE BY A QUALIFIED, LICENSED PLUMBER
1. Shut off water supply. Remove old faucet and
flexible hoses. Clean sink surface in preparation
for the new faucet. Flush water connection at
home to make sure no debris is stuck in the
line.
2. Unscrew hex screw from the faucet base.
Remove handle and handle cover from the
faucet.
4
SPOUT FAUCET ASSEMBLY FRONT COVER
1.5 GPM RESTRICTOR ALLEN KEY
HEX SCREW
HANDLES