Publicité
Les langues disponibles
Les langues disponibles
Section
06
MP3/WMA/WAV Player
Playing MP3/WMA/WAV
1
6
5
These are the basic steps necessary to play an
MP3/WMA/WAV with your built-in CD player.
More advanced MP3/WMA/WAV operation is
explained starting on page 22.
1 EQ indicator
Shows which equalizer curve is selected.
2 Folder number indicator
Shows the number of folder currently play-
ing.
3 Play time indicator
Shows the elapsed playing time of the cur-
rent track (file).
4 Track number indicator
Shows the track (file) currently playing.
5 WMA indicator
Shows when a WMA file is playing.
6 MP3 indicator
Shows when an MP3 file is playing.
1
Press OPEN to open the front panel.
CD loading slot appears.
# After a CD-ROM has been inserted, press
SOURCE to select the built-in CD player.
2
Insert a CD-ROM into the CD loading
slot.
Playback will automatically start.
20
En
2
3
4
CD loading slot
# You can eject a CD-ROM by pressing EJECT.
# To avoid a malfunction, make sure that no
metal object comes into contact with the term-
inals when the front panel is open.
3
Close the front panel.
4
Use VOLUME to adjust the sound level.
Rotate it to increase or decrease the volume.
5
Press a or b to select a folder.
# You cannot select a folder that does not have
an MP3/WMA/WAV file recorded in it.
# To return to folder 01 (ROOT), press and hold
BAND. However, if folder 01 (ROOT) contains no
files, playback commences with folder 02.
6
To perform fast forward or reverse,
press and hold c or d.
# This is fast forward and reverse operation only
for the file being played.
# If you select ROUGH, pressing and holding c
or d enables you to search every 10 tracks in the
current folder. (Refer to Selecting the search meth-
od on page 24.)
7
To skip back or forward to another
track, press c or d.
Pressing d skips to the start of the next track.
Pressing c once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
EJECT button
Publicité
