Télécharger Imprimer la page

Steba WK 10 Mode D'emploi page 11

Publicité

Les langues disponibles
  • FR

Les langues disponibles

∙ If a GS-tested 16 A multi-pin extension is used, it may not be
charged with more than 3680 watts due to fire hazard.
∙ Make sure that children do not tease the cable or that a trip
hazard occurs.
∙ The device must always be disconnected from the power supply
if it is not supervised and before assembling, disassembling or
cleaning.
∙ Do not use the device for cooking on a cooktop.
Cleaning
Attention! Pull the plug before cleaning and allow
the device to cool down.
∙ Never immerse the unit into water.
∙ Do not use abrasives, oven spray or solvents.
∙ Clean the housing with a damp cloth with detergent and dry.
Occasionally rinse with clean water.
∙ To clean the particle filter, take it out of the device.
∙ Superficial stains on the heating plate can be removed with
stainless steel cleaner.
∙ Depending on the hardness of water, the device needs to be
scaled regularly. To do this, fill the kettle with water and des-
caler or vinegar. Heat the mixture and then rinse the device
with fresh water,
Workplace
Important:
Never place this device on or next to hot surfaces (e.g. hot stoves).
Only use it on a even, stable and a heat resisting surface. It is im-
portant that no inflammable items are near to the device. Do not
place the device on the edge of the table so that it cannot be
touched by children or fall down when touched.
Make sure that the ON/OFF switch is not blocked by any
objects. The device may overheat and destroy itself.
11

Publicité

loading