EDIFIER X5 Pro Manuel D'utilisation

True Wire l ess E arbud s wi th Act ive Noi s e Ca ncell ati on
EN 1. Power ON/OFF
Open or close the case to power on/off.
2. First Pairing
1. Once powered on, the earbuds will automatically enter Bluetooth
pairing.
2. Select "EDIFIER X5 Pro" in your device setting to connect.
3. Pairing For New Device
1. Place the earbuds in the case and keep it open.
2. Press and hold the button on the case for 3s until white and red
LED blink.
3. Select "EDIFIER X5 Pro" in your device setting to connect.
Note: For subsequent use, the earbuds will automatically connect to
the device used last time.
4. Reset
1. Place the earbuds in the case and keep it open.
2. Press the button on the case 3 times, white LED blinks until the
reset is complete, then the earbuds will automatically enter
Bluetooth pairing.
5. Charging
Input: 5V
Note: Please do not charge the earbuds when there is sweat or other
liquids inside the charging port, which may damage the earbuds.
6. Controls
Note:
1. Default sound control: noise cancellation / ambient sound / noise
cancellation off.
2. Images are for illustrative purposes only and may differ from the
actual product.
For more information, please visit our website:
@Edifierglobal
Model: EDF200136
Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.edifier.com
2024 Edifier International Limited. All rights reserved.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade,
information contained herein may be subject to change from time
to time without prior notice.
Products of EDIFIER will be customized for different applications.
Pictures and illustrations shown on this manual may be slightly
different from actual product. If any difference is found, the actual
product prevails.
X5 Pro
200mA(Earbuds)
www.edifier.com
@Edifier_Global
Manual
5V 1A(Charging case)
@Edifier_Global