Télécharger Imprimer la page

Husky 8111046A Guide D'utilisation Et D'entretien page 3

Publicité

Les langues disponibles

Les langues disponibles

Safety Information (continued)
CAUTION: Remove the plug from the socket before
performing maintenance. Before using the machine make
sure that the frequency and voltage shown on the rating
plate correspond with the mains voltage. Speci cations
and details are subject to change without prior notice.
The accessories shown in the pictures may vary from
model to model.
NOTICE: Use only as described in this manual. Use only
manufacturer's recommended attachments. This wet/dry vacuum
is intended for household use only.
SERVICING OF A DOUBLE-INSULATED
WET/DRY VACUUM
In a double-insulated wet/dry vacuum, two systems of insulation
are provided instead of grounding. This means that no grounding
is provided on a double-insulated appliance, nor should a means
Warranty
HUSKY LIMITED LIFETIME WARRANTY
If this Husky product ever fails due to a defect in material or workmanship, return the product to any Home Depot retail store for replacement
with an item of equal or greater value. This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal
wear and tear. This warranty gives you speci c rights, and you may also have other rights, which vary from state to state.
Contact the Customer Service Team at 1-888-HD-HUSKY or visit www.HUSKYTOOLS.COM.
for grounding be added. Servicing a double-insulated wet/dry
vacuum requires extreme care and knowledge of the system and
should be done only by quali ed service personnel. Replacement
parts for a double-insulated wet/dry vacuum must be identical to
the parts they replace. Your double-insulated wet/dry vacuum is
marked with the words "DOUBLE-INSULATED" and the symbol
(square within a square) may also be marked on the appliance.
To reduce the risk of injury from electrical shock:
1.
This appliance has a polarized plug (one blade is wider than
the other). This plug will t in a polarized outlet only one
way. If the plug does not t fully in the outlet, reverse the
plug. If it still does not t, contact a quali ed electrician to
install the proper outlet. Do not change the plug in any way.
2.
Unplug the power cord before servicing the electrical parts
of the wet/dry vacuum.
SAVE THIS MANUAL
3
Please contact 1-888-HD-HUSKY for further assistance.
HUSKYTOOLS.COM

Publicité

loading