Outdoor living today 12ft X 16ft Breeze Manuel D'assemblage page 9

16.
Carefully slide Joist notches of Ladder Section
onto Girder. Try to align notches so they fall into place
all at once. With notches of Ladder Section all sitting
correctly on Girder, slide Section approximately 7" from
Post. Check alignment of opposite end of Ladder
Section.
Joist should sit
flush against Post.
18.
With all Ladder Sections in place,
check once more for equal spacing. When
satisfied with Ladder Section positioning,
attach to Girders with 4 - 4" screws per
Ladder. Screw from top edge of Joist down
into Girder.
Pilot hole screws first to help with screwing. Pilot Hole Joist
Toll Free 1-888-658-1658
Equally Space
Middle Ladder 17.
Sections.
Ladder Section adjacent to Middle Post should sit flush
against Post. Equally space Middle Ladder Sections.
first and secure
with 4" screws/
Ladder Section.
www.outdoorlivingtoday.com
Page 9
Notch slides onto Girder
Set remaining Ladder Sections in place for side.
5 1/2"
sales@outdoorlivingtoday.com